dissertation research design example

• How it works

How to Write a Research Design – Guide with Examples

Published by Alaxendra Bets at August 14th, 2021 , Revised On June 24, 2024

A research design is a structure that combines different components of research. It involves the use of different data collection and data analysis techniques logically to answer the  research questions .

It would be best to make some decisions about addressing the research questions adequately before starting the research process, which is achieved with the help of the research design.

Below are the key aspects of the decision-making process:

• Data type required for research
• Research resources
• Participants required for research
• Hypothesis based upon research question(s)
• Data analysis  methodologies
• Variables (Independent, dependent, and confounding)
• The location and timescale for conducting the data
• The time period required for research

The research design provides the strategy of investigation for your project. Furthermore, it defines the parameters and criteria to compile the data to evaluate results and conclude.

Your project’s validity depends on the data collection and  interpretation techniques.  A strong research design reflects a strong  dissertation , scientific paper, or research proposal .

Step 1: Establish Priorities for Research Design

Before conducting any research study, you must address an important question: “how to create a research design.”

The research design depends on the researcher’s priorities and choices because every research has different priorities. For a complex research study involving multiple methods, you may choose to have more than one research design.

Multimethodology or multimethod research includes using more than one data collection method or research in a research study or set of related studies.

If one research design is weak in one area, then another research design can cover that weakness. For instance, a  dissertation analyzing different situations or cases will have more than one research design.

For example:

• Experimental research involves experimental investigation and laboratory experience, but it does not accurately investigate the real world.
• Quantitative research is good for the  statistical part of the project, but it may not provide an in-depth understanding of the  topic .
• Also, correlational research will not provide experimental results because it is a technique that assesses the statistical relationship between two variables.

While scientific considerations are a fundamental aspect of the research design, It is equally important that the researcher think practically before deciding on its structure. Here are some questions that you should think of;

• Do you have enough time to gather data and complete the write-up?
• Will you be able to collect the necessary data by interviewing a specific person or visiting a specific location?
• Do you have in-depth knowledge about the  different statistical analysis and data collection techniques to address the research questions  or test the  hypothesis ?

If you think that the chosen research design cannot answer the research questions properly, you can refine your research questions to gain better insight.

Step 2: Data Type you Need for Research

Decide on the type of data you need for your research. The type of data you need to collect depends on your research questions or research hypothesis. Two types of research data can be used to answer the research questions:

Primary Data Vs. Secondary Data

Qualitative Vs. Quantitative Data

Also, see; Research methods, design, and analysis .

Need help with a thesis chapter?

• Hire an expert from ResearchProspect today!
• Statistical analysis, research methodology, discussion of the results or conclusion – our experts can help you no matter how complex the requirements are.

Step 3: Data Collection Techniques

Once you have selected the type of research to answer your research question, you need to decide where and how to collect the data.

It is time to determine your research method to address the  research problem . Research methods involve procedures, techniques, materials, and tools used for the study.

For instance, a dissertation research design includes the different resources and data collection techniques and helps establish your  dissertation’s structure .

The following table shows the characteristics of the most popularly employed research methods.

Research Methods

Step 4: Procedure of Data Analysis

Use of the  correct data and statistical analysis technique is necessary for the validity of your research. Therefore, you need to be certain about the data type that would best address the research problem. Choosing an appropriate analysis method is the final step for the research design. It can be split into two main categories;

Quantitative Data Analysis

The quantitative data analysis technique involves analyzing the numerical data with the help of different applications such as; SPSS, STATA, Excel, origin lab, etc.

This data analysis strategy tests different variables such as spectrum, frequencies, averages, and more. The research question and the hypothesis must be established to identify the variables for testing.

Qualitative Data Analysis

Qualitative data analysis of figures, themes, and words allows for flexibility and the researcher’s subjective opinions. This means that the researcher’s primary focus will be interpreting patterns, tendencies, and accounts and understanding the implications and social framework.

You should be clear about your research objectives before starting to analyze the data. For example, you should ask yourself whether you need to explain respondents’ experiences and insights or do you also need to evaluate their responses with reference to a certain social framework.

Step 5: Write your Research Proposal

The research design is an important component of a research proposal because it plans the project’s execution. You can share it with the supervisor, who would evaluate the feasibility and capacity of the results  and  conclusion .

Read our guidelines to write a research proposal  if you have already formulated your research design. The research proposal is written in the future tense because you are writing your proposal before conducting research.

The  research methodology  or research design, on the other hand, is generally written in the past tense.

How to Write a Research Design – Conclusion

A research design is the plan, structure, strategy of investigation conceived to answer the research question and test the hypothesis. The dissertation research design can be classified based on the type of data and the type of analysis.

Above mentioned five steps are the answer to how to write a research design. So, follow these steps to  formulate the perfect research design for your dissertation .

ResearchProspect writers have years of experience creating research designs that align with the dissertation’s aim and objectives. If you are struggling with your dissertation methodology chapter, you might want to look at our dissertation part-writing service.

Our dissertation writers can also help you with the full dissertation paper . No matter how urgent or complex your need may be, ResearchProspect can help. We also offer PhD level research paper writing services.

Frequently Asked Questions

What is research design.

Research design is a systematic plan that guides the research process, outlining the methodology and procedures for collecting and analysing data. It determines the structure of the study, ensuring the research question is answered effectively, reliably, and validly. It serves as the blueprint for the entire research project.

How to write a research design?

To write a research design, define your research question, identify the research method (qualitative, quantitative, or mixed), choose data collection techniques (e.g., surveys, interviews), determine the sample size and sampling method, outline data analysis procedures, and highlight potential limitations and ethical considerations for the study.

How to write the design section of a research paper?

In the design section of a research paper, describe the research methodology chosen and justify its selection. Outline the data collection methods, participants or samples, instruments used, and procedures followed. Detail any experimental controls, if applicable. Ensure clarity and precision to enable replication of the study by other researchers.

How to write a research design in methodology?

To write a research design in methodology, clearly outline the research strategy (e.g., experimental, survey, case study). Describe the sampling technique, participants, and data collection methods. Detail the procedures for data collection and analysis. Justify choices by linking them to research objectives, addressing reliability and validity.

You May Also Like

Repository of ten perfect research question examples will provide you a better perspective about how to create research questions.

How to write a hypothesis for dissertation,? A hypothesis is a statement that can be tested with the help of experimental or theoretical research.

Here we explore what is research problem in dissertation with research problem examples to help you understand how and when to write a research problem.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Research Design

Same as research approach, different textbooks place different meanings on research design. Some authors consider research design as the choice between qualitative and quantitative research methods. Others argue that research design refers to the choice of specific methods of data collection and analysis. Research design is also placed as a master plan for conducting a research project and this appears to be the most authentic explanation of the term.

 In your dissertation you can define research design as a general plan about what you will do to answer the research question. [1] It is a framework for choosing specific methods of data collection and data analysis.

Research design can be divided into two groups:  exploratory  and  conclusive . Exploratory research, according to its name merely aims to explore specific aspects of the research area. Exploratory research does not aim to provide final and conclusive answers to research questions. The researcher may even change the direction of the study to a certain extent, however not fundamentally, according to new evidences gained during the research process.

Conclusive research, on the contrary, generate findings that can be practically useful for decision-making. The following Table 1 illustrates the main differences between exploratory and conclusive research in relation to important components of a dissertation.

Table 1 Major differences between exploratory and conclusive research design [2]

The following can be mentioned as examples with exploratory design:

• A critical analysis of argument of mandatory CSR for UK private sector organisations
• A study into contradictions between CSR program and initiatives and business practices: a case study of Philip Morris USA
• An investigation into the ways of customer relationship management in mobile marketing environment

Studies listed above do not aim to generate final and conclusive evidences to research questions. These studies merely aim to explore their respective research areas.

Conclusive research  can be divided into two categories:  descriptive  and  causal . Descriptive research design, as the name suggests, describes specific elements, causes, or phenomena in the research area.

Table 2 Examples for descriptive research design

Causal research design , on the other hand, is conducted to study cause-and-effect relationships.  Table 3 below illustrates some examples for studies with causal research design.

Table 3 Examples for studies with causal design

My e-book,  The Ultimate Guide to Writing a Dissertation in Business Studies: a step by step assistance  contains discussions of theory and application of research designs. The e-book also explains all stages of the  research process  starting from the  selection of the research area  to writing personal reflection. Important elements of dissertations such as  research philosophy ,  research approach ,  methods of data collection ,  data analysis  and  sampling  are explained in this e-book in simple words.

John Dudovskiy

[1] Saunders, M., Lewis, P. & Thornhill, A. (2012) “Research Methods for Business Students” 6 th  edition, Pearson Education Limited

[2] Source: Pride and Ferrell (2007)

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Types of Research Designs
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

Introduction

Before beginning your paper, you need to decide how you plan to design the study .

The research design refers to the overall strategy and analytical approach that you have chosen in order to integrate, in a coherent and logical way, the different components of the study, thus ensuring that the research problem will be thoroughly investigated. It constitutes the blueprint for the collection, measurement, and interpretation of information and data. Note that the research problem determines the type of design you choose, not the other way around!

De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Trochim, William M.K. Research Methods Knowledge Base. 2006.

General Structure and Writing Style

The function of a research design is to ensure that the evidence obtained enables you to effectively address the research problem logically and as unambiguously as possible . In social sciences research, obtaining information relevant to the research problem generally entails specifying the type of evidence needed to test the underlying assumptions of a theory, to evaluate a program, or to accurately describe and assess meaning related to an observable phenomenon.

With this in mind, a common mistake made by researchers is that they begin their investigations before they have thought critically about what information is required to address the research problem. Without attending to these design issues beforehand, the overall research problem will not be adequately addressed and any conclusions drawn will run the risk of being weak and unconvincing. As a consequence, the overall validity of the study will be undermined.

The length and complexity of describing the research design in your paper can vary considerably, but any well-developed description will achieve the following :

• Identify the research problem clearly and justify its selection, particularly in relation to any valid alternative designs that could have been used,
• Review and synthesize previously published literature associated with the research problem,
• Clearly and explicitly specify hypotheses [i.e., research questions] central to the problem,
• Effectively describe the information and/or data which will be necessary for an adequate testing of the hypotheses and explain how such information and/or data will be obtained, and
• Describe the methods of analysis to be applied to the data in determining whether or not the hypotheses are true or false.

The research design is usually incorporated into the introduction of your paper . You can obtain an overall sense of what to do by reviewing studies that have utilized the same research design [e.g., using a case study approach]. This can help you develop an outline to follow for your own paper.

NOTE: Use the SAGE Research Methods Online and Cases and the SAGE Research Methods Videos databases to search for scholarly resources on how to apply specific research designs and methods . The Research Methods Online database contains links to more than 175,000 pages of SAGE publisher's book, journal, and reference content on quantitative, qualitative, and mixed research methodologies. Also included is a collection of case studies of social research projects that can be used to help you better understand abstract or complex methodological concepts. The Research Methods Videos database contains hours of tutorials, interviews, video case studies, and mini-documentaries covering the entire research process.

Creswell, John W. and J. David Creswell. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 5th edition. Thousand Oaks, CA: Sage, 2018; De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Leedy, Paul D. and Jeanne Ellis Ormrod. Practical Research: Planning and Design . Tenth edition. Boston, MA: Pearson, 2013; Vogt, W. Paul, Dianna C. Gardner, and Lynne M. Haeffele. When to Use What Research Design . New York: Guilford, 2012.

Action Research Design

Definition and Purpose

The essentials of action research design follow a characteristic cycle whereby initially an exploratory stance is adopted, where an understanding of a problem is developed and plans are made for some form of interventionary strategy. Then the intervention is carried out [the "action" in action research] during which time, pertinent observations are collected in various forms. The new interventional strategies are carried out, and this cyclic process repeats, continuing until a sufficient understanding of [or a valid implementation solution for] the problem is achieved. The protocol is iterative or cyclical in nature and is intended to foster deeper understanding of a given situation, starting with conceptualizing and particularizing the problem and moving through several interventions and evaluations.

What do these studies tell you ?

• This is a collaborative and adaptive research design that lends itself to use in work or community situations.
• Design focuses on pragmatic and solution-driven research outcomes rather than testing theories.
• When practitioners use action research, it has the potential to increase the amount they learn consciously from their experience; the action research cycle can be regarded as a learning cycle.
• Action research studies often have direct and obvious relevance to improving practice and advocating for change.
• There are no hidden controls or preemption of direction by the researcher.

What these studies don't tell you ?

• It is harder to do than conducting conventional research because the researcher takes on responsibilities of advocating for change as well as for researching the topic.
• Action research is much harder to write up because it is less likely that you can use a standard format to report your findings effectively [i.e., data is often in the form of stories or observation].
• Personal over-involvement of the researcher may bias research results.
• The cyclic nature of action research to achieve its twin outcomes of action [e.g. change] and research [e.g. understanding] is time-consuming and complex to conduct.
• Advocating for change usually requires buy-in from study participants.

Coghlan, David and Mary Brydon-Miller. The Sage Encyclopedia of Action Research . Thousand Oaks, CA:  Sage, 2014; Efron, Sara Efrat and Ruth Ravid. Action Research in Education: A Practical Guide . New York: Guilford, 2013; Gall, Meredith. Educational Research: An Introduction . Chapter 18, Action Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Kemmis, Stephen and Robin McTaggart. “Participatory Action Research.” In Handbook of Qualitative Research . Norman Denzin and Yvonna S. Lincoln, eds. 2nd ed. (Thousand Oaks, CA: SAGE, 2000), pp. 567-605; McNiff, Jean. Writing and Doing Action Research . London: Sage, 2014; Reason, Peter and Hilary Bradbury. Handbook of Action Research: Participative Inquiry and Practice . Thousand Oaks, CA: SAGE, 2001.

Case Study Design

A case study is an in-depth study of a particular research problem rather than a sweeping statistical survey or comprehensive comparative inquiry. It is often used to narrow down a very broad field of research into one or a few easily researchable examples. The case study research design is also useful for testing whether a specific theory and model actually applies to phenomena in the real world. It is a useful design when not much is known about an issue or phenomenon.

• Approach excels at bringing us to an understanding of a complex issue through detailed contextual analysis of a limited number of events or conditions and their relationships.
• A researcher using a case study design can apply a variety of methodologies and rely on a variety of sources to investigate a research problem.
• Design can extend experience or add strength to what is already known through previous research.
• Social scientists, in particular, make wide use of this research design to examine contemporary real-life situations and provide the basis for the application of concepts and theories and the extension of methodologies.
• The design can provide detailed descriptions of specific and rare cases.
• A single or small number of cases offers little basis for establishing reliability or to generalize the findings to a wider population of people, places, or things.
• Intense exposure to the study of a case may bias a researcher's interpretation of the findings.
• Design does not facilitate assessment of cause and effect relationships.
• Vital information may be missing, making the case hard to interpret.
• The case may not be representative or typical of the larger problem being investigated.
• If the criteria for selecting a case is because it represents a very unusual or unique phenomenon or problem for study, then your interpretation of the findings can only apply to that particular case.

Case Studies. Writing@CSU. Colorado State University; Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 4, Flexible Methods: Case Study Design. 2nd ed. New York: Columbia University Press, 1999; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Greenhalgh, Trisha, editor. Case Study Evaluation: Past, Present and Future Challenges . Bingley, UK: Emerald Group Publishing, 2015; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Stake, Robert E. The Art of Case Study Research . Thousand Oaks, CA: SAGE, 1995; Yin, Robert K. Case Study Research: Design and Theory . Applied Social Research Methods Series, no. 5. 3rd ed. Thousand Oaks, CA: SAGE, 2003.

Causal Design

Causality studies may be thought of as understanding a phenomenon in terms of conditional statements in the form, “If X, then Y.” This type of research is used to measure what impact a specific change will have on existing norms and assumptions. Most social scientists seek causal explanations that reflect tests of hypotheses. Causal effect (nomothetic perspective) occurs when variation in one phenomenon, an independent variable, leads to or results, on average, in variation in another phenomenon, the dependent variable.

Conditions necessary for determining causality:

• Empirical association -- a valid conclusion is based on finding an association between the independent variable and the dependent variable.
• Appropriate time order -- to conclude that causation was involved, one must see that cases were exposed to variation in the independent variable before variation in the dependent variable.
• Nonspuriousness -- a relationship between two variables that is not due to variation in a third variable.
• Causality research designs assist researchers in understanding why the world works the way it does through the process of proving a causal link between variables and by the process of eliminating other possibilities.
• Replication is possible.
• There is greater confidence the study has internal validity due to the systematic subject selection and equity of groups being compared.
• Not all relationships are causal! The possibility always exists that, by sheer coincidence, two unrelated events appear to be related [e.g., Punxatawney Phil could accurately predict the duration of Winter for five consecutive years but, the fact remains, he's just a big, furry rodent].
• Conclusions about causal relationships are difficult to determine due to a variety of extraneous and confounding variables that exist in a social environment. This means causality can only be inferred, never proven.
• If two variables are correlated, the cause must come before the effect. However, even though two variables might be causally related, it can sometimes be difficult to determine which variable comes first and, therefore, to establish which variable is the actual cause and which is the  actual effect.

Beach, Derek and Rasmus Brun Pedersen. Causal Case Study Methods: Foundations and Guidelines for Comparing, Matching, and Tracing . Ann Arbor, MI: University of Michigan Press, 2016; Bachman, Ronet. The Practice of Research in Criminology and Criminal Justice . Chapter 5, Causation and Research Designs. 3rd ed. Thousand Oaks, CA: Pine Forge Press, 2007; Brewer, Ernest W. and Jennifer Kubn. “Causal-Comparative Design.” In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 125-132; Causal Research Design: Experimentation. Anonymous SlideShare Presentation; Gall, Meredith. Educational Research: An Introduction . Chapter 11, Nonexperimental Research: Correlational Designs. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Trochim, William M.K. Research Methods Knowledge Base. 2006.

Cohort Design

Often used in the medical sciences, but also found in the applied social sciences, a cohort study generally refers to a study conducted over a period of time involving members of a population which the subject or representative member comes from, and who are united by some commonality or similarity. Using a quantitative framework, a cohort study makes note of statistical occurrence within a specialized subgroup, united by same or similar characteristics that are relevant to the research problem being investigated, rather than studying statistical occurrence within the general population. Using a qualitative framework, cohort studies generally gather data using methods of observation. Cohorts can be either "open" or "closed."

• Open Cohort Studies [dynamic populations, such as the population of Los Angeles] involve a population that is defined just by the state of being a part of the study in question (and being monitored for the outcome). Date of entry and exit from the study is individually defined, therefore, the size of the study population is not constant. In open cohort studies, researchers can only calculate rate based data, such as, incidence rates and variants thereof.
• Closed Cohort Studies [static populations, such as patients entered into a clinical trial] involve participants who enter into the study at one defining point in time and where it is presumed that no new participants can enter the cohort. Given this, the number of study participants remains constant (or can only decrease).
• The use of cohorts is often mandatory because a randomized control study may be unethical. For example, you cannot deliberately expose people to asbestos, you can only study its effects on those who have already been exposed. Research that measures risk factors often relies upon cohort designs.
• Because cohort studies measure potential causes before the outcome has occurred, they can demonstrate that these “causes” preceded the outcome, thereby avoiding the debate as to which is the cause and which is the effect.
• Cohort analysis is highly flexible and can provide insight into effects over time and related to a variety of different types of changes [e.g., social, cultural, political, economic, etc.].
• Either original data or secondary data can be used in this design.
• In cases where a comparative analysis of two cohorts is made [e.g., studying the effects of one group exposed to asbestos and one that has not], a researcher cannot control for all other factors that might differ between the two groups. These factors are known as confounding variables.
• Cohort studies can end up taking a long time to complete if the researcher must wait for the conditions of interest to develop within the group. This also increases the chance that key variables change during the course of the study, potentially impacting the validity of the findings.
• Due to the lack of randominization in the cohort design, its external validity is lower than that of study designs where the researcher randomly assigns participants.

Healy P, Devane D. “Methodological Considerations in Cohort Study Designs.” Nurse Researcher 18 (2011): 32-36; Glenn, Norval D, editor. Cohort Analysis . 2nd edition. Thousand Oaks, CA: Sage, 2005; Levin, Kate Ann. Study Design IV: Cohort Studies. Evidence-Based Dentistry 7 (2003): 51–52; Payne, Geoff. “Cohort Study.” In The SAGE Dictionary of Social Research Methods . Victor Jupp, editor. (Thousand Oaks, CA: Sage, 2006), pp. 31-33; Study Design 101. Himmelfarb Health Sciences Library. George Washington University, November 2011; Cohort Study. Wikipedia.

Cross-Sectional Design

Cross-sectional research designs have three distinctive features: no time dimension; a reliance on existing differences rather than change following intervention; and, groups are selected based on existing differences rather than random allocation. The cross-sectional design can only measure differences between or from among a variety of people, subjects, or phenomena rather than a process of change. As such, researchers using this design can only employ a relatively passive approach to making causal inferences based on findings.

• Cross-sectional studies provide a clear 'snapshot' of the outcome and the characteristics associated with it, at a specific point in time.
• Unlike an experimental design, where there is an active intervention by the researcher to produce and measure change or to create differences, cross-sectional designs focus on studying and drawing inferences from existing differences between people, subjects, or phenomena.
• Entails collecting data at and concerning one point in time. While longitudinal studies involve taking multiple measures over an extended period of time, cross-sectional research is focused on finding relationships between variables at one moment in time.
• Groups identified for study are purposely selected based upon existing differences in the sample rather than seeking random sampling.
• Cross-section studies are capable of using data from a large number of subjects and, unlike observational studies, is not geographically bound.
• Can estimate prevalence of an outcome of interest because the sample is usually taken from the whole population.
• Because cross-sectional designs generally use survey techniques to gather data, they are relatively inexpensive and take up little time to conduct.
• Finding people, subjects, or phenomena to study that are very similar except in one specific variable can be difficult.
• Results are static and time bound and, therefore, give no indication of a sequence of events or reveal historical or temporal contexts.
• Studies cannot be utilized to establish cause and effect relationships.
• This design only provides a snapshot of analysis so there is always the possibility that a study could have differing results if another time-frame had been chosen.
• There is no follow up to the findings.

Bethlehem, Jelke. "7: Cross-sectional Research." In Research Methodology in the Social, Behavioural and Life Sciences . Herman J Adèr and Gideon J Mellenbergh, editors. (London, England: Sage, 1999), pp. 110-43; Bourque, Linda B. “Cross-Sectional Design.” In  The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman, and Tim Futing Liao. (Thousand Oaks, CA: 2004), pp. 230-231; Hall, John. “Cross-Sectional Survey Design.” In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 173-174; Helen Barratt, Maria Kirwan. Cross-Sectional Studies: Design Application, Strengths and Weaknesses of Cross-Sectional Studies. Healthknowledge, 2009. Cross-Sectional Study. Wikipedia.

Descriptive Design

Descriptive research designs help provide answers to the questions of who, what, when, where, and how associated with a particular research problem; a descriptive study cannot conclusively ascertain answers to why. Descriptive research is used to obtain information concerning the current status of the phenomena and to describe "what exists" with respect to variables or conditions in a situation.

• The subject is being observed in a completely natural and unchanged natural environment. True experiments, whilst giving analyzable data, often adversely influence the normal behavior of the subject [a.k.a., the Heisenberg effect whereby measurements of certain systems cannot be made without affecting the systems].
• Descriptive research is often used as a pre-cursor to more quantitative research designs with the general overview giving some valuable pointers as to what variables are worth testing quantitatively.
• If the limitations are understood, they can be a useful tool in developing a more focused study.
• Descriptive studies can yield rich data that lead to important recommendations in practice.
• Appoach collects a large amount of data for detailed analysis.
• The results from a descriptive research cannot be used to discover a definitive answer or to disprove a hypothesis.
• Because descriptive designs often utilize observational methods [as opposed to quantitative methods], the results cannot be replicated.
• The descriptive function of research is heavily dependent on instrumentation for measurement and observation.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 5, Flexible Methods: Descriptive Research. 2nd ed. New York: Columbia University Press, 1999; Given, Lisa M. "Descriptive Research." In Encyclopedia of Measurement and Statistics . Neil J. Salkind and Kristin Rasmussen, editors. (Thousand Oaks, CA: Sage, 2007), pp. 251-254; McNabb, Connie. Descriptive Research Methodologies. Powerpoint Presentation; Shuttleworth, Martyn. Descriptive Research Design, September 26, 2008; Erickson, G. Scott. "Descriptive Research Design." In New Methods of Market Research and Analysis . (Northampton, MA: Edward Elgar Publishing, 2017), pp. 51-77; Sahin, Sagufta, and Jayanta Mete. "A Brief Study on Descriptive Research: Its Nature and Application in Social Science." International Journal of Research and Analysis in Humanities 1 (2021): 11; K. Swatzell and P. Jennings. “Descriptive Research: The Nuts and Bolts.” Journal of the American Academy of Physician Assistants 20 (2007), pp. 55-56; Kane, E. Doing Your Own Research: Basic Descriptive Research in the Social Sciences and Humanities . London: Marion Boyars, 1985.

Experimental Design

A blueprint of the procedure that enables the researcher to maintain control over all factors that may affect the result of an experiment. In doing this, the researcher attempts to determine or predict what may occur. Experimental research is often used where there is time priority in a causal relationship (cause precedes effect), there is consistency in a causal relationship (a cause will always lead to the same effect), and the magnitude of the correlation is great. The classic experimental design specifies an experimental group and a control group. The independent variable is administered to the experimental group and not to the control group, and both groups are measured on the same dependent variable. Subsequent experimental designs have used more groups and more measurements over longer periods. True experiments must have control, randomization, and manipulation.

• Experimental research allows the researcher to control the situation. In so doing, it allows researchers to answer the question, “What causes something to occur?”
• Permits the researcher to identify cause and effect relationships between variables and to distinguish placebo effects from treatment effects.
• Experimental research designs support the ability to limit alternative explanations and to infer direct causal relationships in the study.
• Approach provides the highest level of evidence for single studies.
• The design is artificial, and results may not generalize well to the real world.
• The artificial settings of experiments may alter the behaviors or responses of participants.
• Experimental designs can be costly if special equipment or facilities are needed.
• Some research problems cannot be studied using an experiment because of ethical or technical reasons.
• Difficult to apply ethnographic and other qualitative methods to experimentally designed studies.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 7, Flexible Methods: Experimental Research. 2nd ed. New York: Columbia University Press, 1999; Chapter 2: Research Design, Experimental Designs. School of Psychology, University of New England, 2000; Chow, Siu L. "Experimental Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 448-453; "Experimental Design." In Social Research Methods . Nicholas Walliman, editor. (London, England: Sage, 2006), pp, 101-110; Experimental Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Kirk, Roger E. Experimental Design: Procedures for the Behavioral Sciences . 4th edition. Thousand Oaks, CA: Sage, 2013; Trochim, William M.K. Experimental Design. Research Methods Knowledge Base. 2006; Rasool, Shafqat. Experimental Research. Slideshare presentation.

Exploratory Design

An exploratory design is conducted about a research problem when there are few or no earlier studies to refer to or rely upon to predict an outcome . The focus is on gaining insights and familiarity for later investigation or undertaken when research problems are in a preliminary stage of investigation. Exploratory designs are often used to establish an understanding of how best to proceed in studying an issue or what methodology would effectively apply to gathering information about the issue.

The goals of exploratory research are intended to produce the following possible insights:

• Familiarity with basic details, settings, and concerns.
• Well grounded picture of the situation being developed.
• Generation of new ideas and assumptions.
• Development of tentative theories or hypotheses.
• Determination about whether a study is feasible in the future.
• Issues get refined for more systematic investigation and formulation of new research questions.
• Direction for future research and techniques get developed.
• Design is a useful approach for gaining background information on a particular topic.
• Exploratory research is flexible and can address research questions of all types (what, why, how).
• Provides an opportunity to define new terms and clarify existing concepts.
• Exploratory research is often used to generate formal hypotheses and develop more precise research problems.
• In the policy arena or applied to practice, exploratory studies help establish research priorities and where resources should be allocated.
• Exploratory research generally utilizes small sample sizes and, thus, findings are typically not generalizable to the population at large.
• The exploratory nature of the research inhibits an ability to make definitive conclusions about the findings. They provide insight but not definitive conclusions.
• The research process underpinning exploratory studies is flexible but often unstructured, leading to only tentative results that have limited value to decision-makers.
• Design lacks rigorous standards applied to methods of data gathering and analysis because one of the areas for exploration could be to determine what method or methodologies could best fit the research problem.

Cuthill, Michael. “Exploratory Research: Citizen Participation, Local Government, and Sustainable Development in Australia.” Sustainable Development 10 (2002): 79-89; Streb, Christoph K. "Exploratory Case Study." In Encyclopedia of Case Study Research . Albert J. Mills, Gabrielle Durepos and Eiden Wiebe, editors. (Thousand Oaks, CA: Sage, 2010), pp. 372-374; Taylor, P. J., G. Catalano, and D.R.F. Walker. “Exploratory Analysis of the World City Network.” Urban Studies 39 (December 2002): 2377-2394; Exploratory Research. Wikipedia.

Field Research Design

Sometimes referred to as ethnography or participant observation, designs around field research encompass a variety of interpretative procedures [e.g., observation and interviews] rooted in qualitative approaches to studying people individually or in groups while inhabiting their natural environment as opposed to using survey instruments or other forms of impersonal methods of data gathering. Information acquired from observational research takes the form of “ field notes ” that involves documenting what the researcher actually sees and hears while in the field. Findings do not consist of conclusive statements derived from numbers and statistics because field research involves analysis of words and observations of behavior. Conclusions, therefore, are developed from an interpretation of findings that reveal overriding themes, concepts, and ideas. More information can be found HERE .

• Field research is often necessary to fill gaps in understanding the research problem applied to local conditions or to specific groups of people that cannot be ascertained from existing data.
• The research helps contextualize already known information about a research problem, thereby facilitating ways to assess the origins, scope, and scale of a problem and to gage the causes, consequences, and means to resolve an issue based on deliberate interaction with people in their natural inhabited spaces.
• Enables the researcher to corroborate or confirm data by gathering additional information that supports or refutes findings reported in prior studies of the topic.
• Because the researcher in embedded in the field, they are better able to make observations or ask questions that reflect the specific cultural context of the setting being investigated.
• Observing the local reality offers the opportunity to gain new perspectives or obtain unique data that challenges existing theoretical propositions or long-standing assumptions found in the literature.

What these studies don't tell you

• A field research study requires extensive time and resources to carry out the multiple steps involved with preparing for the gathering of information, including for example, examining background information about the study site, obtaining permission to access the study site, and building trust and rapport with subjects.
• Requires a commitment to staying engaged in the field to ensure that you can adequately document events and behaviors as they unfold.
• The unpredictable nature of fieldwork means that researchers can never fully control the process of data gathering. They must maintain a flexible approach to studying the setting because events and circumstances can change quickly or unexpectedly.
• Findings can be difficult to interpret and verify without access to documents and other source materials that help to enhance the credibility of information obtained from the field  [i.e., the act of triangulating the data].
• Linking the research problem to the selection of study participants inhabiting their natural environment is critical. However, this specificity limits the ability to generalize findings to different situations or in other contexts or to infer courses of action applied to other settings or groups of people.
• The reporting of findings must take into account how the researcher themselves may have inadvertently affected respondents and their behaviors.

Historical Design

The purpose of a historical research design is to collect, verify, and synthesize evidence from the past to establish facts that defend or refute a hypothesis. It uses secondary sources and a variety of primary documentary evidence, such as, diaries, official records, reports, archives, and non-textual information [maps, pictures, audio and visual recordings]. The limitation is that the sources must be both authentic and valid.

• The historical research design is unobtrusive; the act of research does not affect the results of the study.
• The historical approach is well suited for trend analysis.
• Historical records can add important contextual background required to more fully understand and interpret a research problem.
• There is often no possibility of researcher-subject interaction that could affect the findings.
• Historical sources can be used over and over to study different research problems or to replicate a previous study.
• The ability to fulfill the aims of your research are directly related to the amount and quality of documentation available to understand the research problem.
• Since historical research relies on data from the past, there is no way to manipulate it to control for contemporary contexts.
• Interpreting historical sources can be very time consuming.
• The sources of historical materials must be archived consistently to ensure access. This may especially challenging for digital or online-only sources.
• Original authors bring their own perspectives and biases to the interpretation of past events and these biases are more difficult to ascertain in historical resources.
• Due to the lack of control over external variables, historical research is very weak with regard to the demands of internal validity.
• It is rare that the entirety of historical documentation needed to fully address a research problem is available for interpretation, therefore, gaps need to be acknowledged.

Howell, Martha C. and Walter Prevenier. From Reliable Sources: An Introduction to Historical Methods . Ithaca, NY: Cornell University Press, 2001; Lundy, Karen Saucier. "Historical Research." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor. (Thousand Oaks, CA: Sage, 2008), pp. 396-400; Marius, Richard. and Melvin E. Page. A Short Guide to Writing about History . 9th edition. Boston, MA: Pearson, 2015; Savitt, Ronald. “Historical Research in Marketing.” Journal of Marketing 44 (Autumn, 1980): 52-58;  Gall, Meredith. Educational Research: An Introduction . Chapter 16, Historical Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007.

Longitudinal Design

A longitudinal study follows the same sample over time and makes repeated observations. For example, with longitudinal surveys, the same group of people is interviewed at regular intervals, enabling researchers to track changes over time and to relate them to variables that might explain why the changes occur. Longitudinal research designs describe patterns of change and help establish the direction and magnitude of causal relationships. Measurements are taken on each variable over two or more distinct time periods. This allows the researcher to measure change in variables over time. It is a type of observational study sometimes referred to as a panel study.

• Longitudinal data facilitate the analysis of the duration of a particular phenomenon.
• Enables survey researchers to get close to the kinds of causal explanations usually attainable only with experiments.
• The design permits the measurement of differences or change in a variable from one period to another [i.e., the description of patterns of change over time].
• Longitudinal studies facilitate the prediction of future outcomes based upon earlier factors.
• The data collection method may change over time.
• Maintaining the integrity of the original sample can be difficult over an extended period of time.
• It can be difficult to show more than one variable at a time.
• This design often needs qualitative research data to explain fluctuations in the results.
• A longitudinal research design assumes present trends will continue unchanged.
• It can take a long period of time to gather results.
• There is a need to have a large sample size and accurate sampling to reach representativness.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 6, Flexible Methods: Relational and Longitudinal Research. 2nd ed. New York: Columbia University Press, 1999; Forgues, Bernard, and Isabelle Vandangeon-Derumez. "Longitudinal Analyses." In Doing Management Research . Raymond-Alain Thiétart and Samantha Wauchope, editors. (London, England: Sage, 2001), pp. 332-351; Kalaian, Sema A. and Rafa M. Kasim. "Longitudinal Studies." In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 440-441; Menard, Scott, editor. Longitudinal Research . Thousand Oaks, CA: Sage, 2002; Ployhart, Robert E. and Robert J. Vandenberg. "Longitudinal Research: The Theory, Design, and Analysis of Change.” Journal of Management 36 (January 2010): 94-120; Longitudinal Study. Wikipedia.

Meta-Analysis Design

Meta-analysis is an analytical methodology designed to systematically evaluate and summarize the results from a number of individual studies, thereby, increasing the overall sample size and the ability of the researcher to study effects of interest. The purpose is to not simply summarize existing knowledge, but to develop a new understanding of a research problem using synoptic reasoning. The main objectives of meta-analysis include analyzing differences in the results among studies and increasing the precision by which effects are estimated. A well-designed meta-analysis depends upon strict adherence to the criteria used for selecting studies and the availability of information in each study to properly analyze their findings. Lack of information can severely limit the type of analyzes and conclusions that can be reached. In addition, the more dissimilarity there is in the results among individual studies [heterogeneity], the more difficult it is to justify interpretations that govern a valid synopsis of results. A meta-analysis needs to fulfill the following requirements to ensure the validity of your findings:

• Clearly defined description of objectives, including precise definitions of the variables and outcomes that are being evaluated;
• A well-reasoned and well-documented justification for identification and selection of the studies;
• Assessment and explicit acknowledgment of any researcher bias in the identification and selection of those studies;
• Description and evaluation of the degree of heterogeneity among the sample size of studies reviewed; and,
• Justification of the techniques used to evaluate the studies.
• Can be an effective strategy for determining gaps in the literature.
• Provides a means of reviewing research published about a particular topic over an extended period of time and from a variety of sources.
• Is useful in clarifying what policy or programmatic actions can be justified on the basis of analyzing research results from multiple studies.
• Provides a method for overcoming small sample sizes in individual studies that previously may have had little relationship to each other.
• Can be used to generate new hypotheses or highlight research problems for future studies.
• Small violations in defining the criteria used for content analysis can lead to difficult to interpret and/or meaningless findings.
• A large sample size can yield reliable, but not necessarily valid, results.
• A lack of uniformity regarding, for example, the type of literature reviewed, how methods are applied, and how findings are measured within the sample of studies you are analyzing, can make the process of synthesis difficult to perform.
• Depending on the sample size, the process of reviewing and synthesizing multiple studies can be very time consuming.

Beck, Lewis W. "The Synoptic Method." The Journal of Philosophy 36 (1939): 337-345; Cooper, Harris, Larry V. Hedges, and Jeffrey C. Valentine, eds. The Handbook of Research Synthesis and Meta-Analysis . 2nd edition. New York: Russell Sage Foundation, 2009; Guzzo, Richard A., Susan E. Jackson and Raymond A. Katzell. “Meta-Analysis Analysis.” In Research in Organizational Behavior , Volume 9. (Greenwich, CT: JAI Press, 1987), pp 407-442; Lipsey, Mark W. and David B. Wilson. Practical Meta-Analysis . Thousand Oaks, CA: Sage Publications, 2001; Study Design 101. Meta-Analysis. The Himmelfarb Health Sciences Library, George Washington University; Timulak, Ladislav. “Qualitative Meta-Analysis.” In The SAGE Handbook of Qualitative Data Analysis . Uwe Flick, editor. (Los Angeles, CA: Sage, 2013), pp. 481-495; Walker, Esteban, Adrian V. Hernandez, and Micheal W. Kattan. "Meta-Analysis: It's Strengths and Limitations." Cleveland Clinic Journal of Medicine 75 (June 2008): 431-439.

Mixed-Method Design

• Narrative and non-textual information can add meaning to numeric data, while numeric data can add precision to narrative and non-textual information.
• Can utilize existing data while at the same time generating and testing a grounded theory approach to describe and explain the phenomenon under study.
• A broader, more complex research problem can be investigated because the researcher is not constrained by using only one method.
• The strengths of one method can be used to overcome the inherent weaknesses of another method.
• Can provide stronger, more robust evidence to support a conclusion or set of recommendations.
• May generate new knowledge new insights or uncover hidden insights, patterns, or relationships that a single methodological approach might not reveal.
• Produces more complete knowledge and understanding of the research problem that can be used to increase the generalizability of findings applied to theory or practice.
• A researcher must be proficient in understanding how to apply multiple methods to investigating a research problem as well as be proficient in optimizing how to design a study that coherently melds them together.
• Can increase the likelihood of conflicting results or ambiguous findings that inhibit drawing a valid conclusion or setting forth a recommended course of action [e.g., sample interview responses do not support existing statistical data].
• Because the research design can be very complex, reporting the findings requires a well-organized narrative, clear writing style, and precise word choice.
• Design invites collaboration among experts. However, merging different investigative approaches and writing styles requires more attention to the overall research process than studies conducted using only one methodological paradigm.
• Concurrent merging of quantitative and qualitative research requires greater attention to having adequate sample sizes, using comparable samples, and applying a consistent unit of analysis. For sequential designs where one phase of qualitative research builds on the quantitative phase or vice versa, decisions about what results from the first phase to use in the next phase, the choice of samples and estimating reasonable sample sizes for both phases, and the interpretation of results from both phases can be difficult.
• Due to multiple forms of data being collected and analyzed, this design requires extensive time and resources to carry out the multiple steps involved in data gathering and interpretation.

Burch, Patricia and Carolyn J. Heinrich. Mixed Methods for Policy Research and Program Evaluation . Thousand Oaks, CA: Sage, 2016; Creswell, John w. et al. Best Practices for Mixed Methods Research in the Health Sciences . Bethesda, MD: Office of Behavioral and Social Sciences Research, National Institutes of Health, 2010Creswell, John W. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 4th edition. Thousand Oaks, CA: Sage Publications, 2014; Domínguez, Silvia, editor. Mixed Methods Social Networks Research . Cambridge, UK: Cambridge University Press, 2014; Hesse-Biber, Sharlene Nagy. Mixed Methods Research: Merging Theory with Practice . New York: Guilford Press, 2010; Niglas, Katrin. “How the Novice Researcher Can Make Sense of Mixed Methods Designs.” International Journal of Multiple Research Approaches 3 (2009): 34-46; Onwuegbuzie, Anthony J. and Nancy L. Leech. “Linking Research Questions to Mixed Methods Data Analysis Procedures.” The Qualitative Report 11 (September 2006): 474-498; Tashakorri, Abbas and John W. Creswell. “The New Era of Mixed Methods.” Journal of Mixed Methods Research 1 (January 2007): 3-7; Zhanga, Wanqing. “Mixed Methods Application in Health Intervention Research: A Multiple Case Study.” International Journal of Multiple Research Approaches 8 (2014): 24-35 .

Observational Design

This type of research design draws a conclusion by comparing subjects against a control group, in cases where the researcher has no control over the experiment. There are two general types of observational designs. In direct observations, people know that you are watching them. Unobtrusive measures involve any method for studying behavior where individuals do not know they are being observed. An observational study allows a useful insight into a phenomenon and avoids the ethical and practical difficulties of setting up a large and cumbersome research project.

• Observational studies are usually flexible and do not necessarily need to be structured around a hypothesis about what you expect to observe [data is emergent rather than pre-existing].
• The researcher is able to collect in-depth information about a particular behavior.
• Can reveal interrelationships among multifaceted dimensions of group interactions.
• You can generalize your results to real life situations.
• Observational research is useful for discovering what variables may be important before applying other methods like experiments.
• Observation research designs account for the complexity of group behaviors.
• Reliability of data is low because seeing behaviors occur over and over again may be a time consuming task and are difficult to replicate.
• In observational research, findings may only reflect a unique sample population and, thus, cannot be generalized to other groups.
• There can be problems with bias as the researcher may only "see what they want to see."
• There is no possibility to determine "cause and effect" relationships since nothing is manipulated.
• Sources or subjects may not all be equally credible.
• Any group that is knowingly studied is altered to some degree by the presence of the researcher, therefore, potentially skewing any data collected.

Atkinson, Paul and Martyn Hammersley. “Ethnography and Participant Observation.” In Handbook of Qualitative Research . Norman K. Denzin and Yvonna S. Lincoln, eds. (Thousand Oaks, CA: Sage, 1994), pp. 248-261; Observational Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Patton Michael Quinn. Qualitiative Research and Evaluation Methods . Chapter 6, Fieldwork Strategies and Observational Methods. 3rd ed. Thousand Oaks, CA: Sage, 2002; Payne, Geoff and Judy Payne. "Observation." In Key Concepts in Social Research . The SAGE Key Concepts series. (London, England: Sage, 2004), pp. 158-162; Rosenbaum, Paul R. Design of Observational Studies . New York: Springer, 2010;Williams, J. Patrick. "Nonparticipant Observation." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor.(Thousand Oaks, CA: Sage, 2008), pp. 562-563.

Philosophical Design

Understood more as an broad approach to examining a research problem than a methodological design, philosophical analysis and argumentation is intended to challenge deeply embedded, often intractable, assumptions underpinning an area of study. This approach uses the tools of argumentation derived from philosophical traditions, concepts, models, and theories to critically explore and challenge, for example, the relevance of logic and evidence in academic debates, to analyze arguments about fundamental issues, or to discuss the root of existing discourse about a research problem. These overarching tools of analysis can be framed in three ways:

• Ontology -- the study that describes the nature of reality; for example, what is real and what is not, what is fundamental and what is derivative?
• Epistemology -- the study that explores the nature of knowledge; for example, by what means does knowledge and understanding depend upon and how can we be certain of what we know?
• Axiology -- the study of values; for example, what values does an individual or group hold and why? How are values related to interest, desire, will, experience, and means-to-end? And, what is the difference between a matter of fact and a matter of value?
• Can provide a basis for applying ethical decision-making to practice.
• Functions as a means of gaining greater self-understanding and self-knowledge about the purposes of research.
• Brings clarity to general guiding practices and principles of an individual or group.
• Philosophy informs methodology.
• Refine concepts and theories that are invoked in relatively unreflective modes of thought and discourse.
• Beyond methodology, philosophy also informs critical thinking about epistemology and the structure of reality (metaphysics).
• Offers clarity and definition to the practical and theoretical uses of terms, concepts, and ideas.
• Limited application to specific research problems [answering the "So What?" question in social science research].
• Analysis can be abstract, argumentative, and limited in its practical application to real-life issues.
• While a philosophical analysis may render problematic that which was once simple or taken-for-granted, the writing can be dense and subject to unnecessary jargon, overstatement, and/or excessive quotation and documentation.
• There are limitations in the use of metaphor as a vehicle of philosophical analysis.
• There can be analytical difficulties in moving from philosophy to advocacy and between abstract thought and application to the phenomenal world.

Burton, Dawn. "Part I, Philosophy of the Social Sciences." In Research Training for Social Scientists . (London, England: Sage, 2000), pp. 1-5; Chapter 4, Research Methodology and Design. Unisa Institutional Repository (UnisaIR), University of South Africa; Jarvie, Ian C., and Jesús Zamora-Bonilla, editors. The SAGE Handbook of the Philosophy of Social Sciences . London: Sage, 2011; Labaree, Robert V. and Ross Scimeca. “The Philosophical Problem of Truth in Librarianship.” The Library Quarterly 78 (January 2008): 43-70; Maykut, Pamela S. Beginning Qualitative Research: A Philosophic and Practical Guide . Washington, DC: Falmer Press, 1994; McLaughlin, Hugh. "The Philosophy of Social Research." In Understanding Social Work Research . 2nd edition. (London: SAGE Publications Ltd., 2012), pp. 24-47; Stanford Encyclopedia of Philosophy . Metaphysics Research Lab, CSLI, Stanford University, 2013.

Sequential Design

• The researcher has a limitless option when it comes to sample size and the sampling schedule.
• Due to the repetitive nature of this research design, minor changes and adjustments can be done during the initial parts of the study to correct and hone the research method.
• This is a useful design for exploratory studies.
• There is very little effort on the part of the researcher when performing this technique. It is generally not expensive, time consuming, or workforce intensive.
• Because the study is conducted serially, the results of one sample are known before the next sample is taken and analyzed. This provides opportunities for continuous improvement of sampling and methods of analysis.
• The sampling method is not representative of the entire population. The only possibility of approaching representativeness is when the researcher chooses to use a very large sample size significant enough to represent a significant portion of the entire population. In this case, moving on to study a second or more specific sample can be difficult.
• The design cannot be used to create conclusions and interpretations that pertain to an entire population because the sampling technique is not randomized. Generalizability from findings is, therefore, limited.
• Difficult to account for and interpret variation from one sample to another over time, particularly when using qualitative methods of data collection.

Betensky, Rebecca. Harvard University, Course Lecture Note slides; Bovaird, James A. and Kevin A. Kupzyk. "Sequential Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 1347-1352; Cresswell, John W. Et al. “Advanced Mixed-Methods Research Designs.” In Handbook of Mixed Methods in Social and Behavioral Research . Abbas Tashakkori and Charles Teddle, eds. (Thousand Oaks, CA: Sage, 2003), pp. 209-240; Henry, Gary T. "Sequential Sampling." In The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman and Tim Futing Liao, editors. (Thousand Oaks, CA: Sage, 2004), pp. 1027-1028; Nataliya V. Ivankova. “Using Mixed-Methods Sequential Explanatory Design: From Theory to Practice.” Field Methods 18 (February 2006): 3-20; Bovaird, James A. and Kevin A. Kupzyk. “Sequential Design.” In Encyclopedia of Research Design . Neil J. Salkind, ed. Thousand Oaks, CA: Sage, 2010; Sequential Analysis. Wikipedia.

Systematic Review

• A systematic review synthesizes the findings of multiple studies related to each other by incorporating strategies of analysis and interpretation intended to reduce biases and random errors.
• The application of critical exploration, evaluation, and synthesis methods separates insignificant, unsound, or redundant research from the most salient and relevant studies worthy of reflection.
• They can be use to identify, justify, and refine hypotheses, recognize and avoid hidden problems in prior studies, and explain data inconsistencies and conflicts in data.
• Systematic reviews can be used to help policy makers formulate evidence-based guidelines and regulations.
• The use of strict, explicit, and pre-determined methods of synthesis, when applied appropriately, provide reliable estimates about the effects of interventions, evaluations, and effects related to the overarching research problem investigated by each study under review.
• Systematic reviews illuminate where knowledge or thorough understanding of a research problem is lacking and, therefore, can then be used to guide future research.
• The accepted inclusion of unpublished studies [i.e., grey literature] ensures the broadest possible way to analyze and interpret research on a topic.
• Results of the synthesis can be generalized and the findings extrapolated into the general population with more validity than most other types of studies .
• Systematic reviews do not create new knowledge per se; they are a method for synthesizing existing studies about a research problem in order to gain new insights and determine gaps in the literature.
• The way researchers have carried out their investigations [e.g., the period of time covered, number of participants, sources of data analyzed, etc.] can make it difficult to effectively synthesize studies.
• The inclusion of unpublished studies can introduce bias into the review because they may not have undergone a rigorous peer-review process prior to publication. Examples may include conference presentations or proceedings, publications from government agencies, white papers, working papers, and internal documents from organizations, and doctoral dissertations and Master's theses.

Denyer, David and David Tranfield. "Producing a Systematic Review." In The Sage Handbook of Organizational Research Methods .  David A. Buchanan and Alan Bryman, editors. ( Thousand Oaks, CA: Sage Publications, 2009), pp. 671-689; Foster, Margaret J. and Sarah T. Jewell, editors. Assembling the Pieces of a Systematic Review: A Guide for Librarians . Lanham, MD: Rowman and Littlefield, 2017; Gough, David, Sandy Oliver, James Thomas, editors. Introduction to Systematic Reviews . 2nd edition. Los Angeles, CA: Sage Publications, 2017; Gopalakrishnan, S. and P. Ganeshkumar. “Systematic Reviews and Meta-analysis: Understanding the Best Evidence in Primary Healthcare.” Journal of Family Medicine and Primary Care 2 (2013): 9-14; Gough, David, James Thomas, and Sandy Oliver. "Clarifying Differences between Review Designs and Methods." Systematic Reviews 1 (2012): 1-9; Khan, Khalid S., Regina Kunz, Jos Kleijnen, and Gerd Antes. “Five Steps to Conducting a Systematic Review.” Journal of the Royal Society of Medicine 96 (2003): 118-121; Mulrow, C. D. “Systematic Reviews: Rationale for Systematic Reviews.” BMJ 309:597 (September 1994); O'Dwyer, Linda C., and Q. Eileen Wafford. "Addressing Challenges with Systematic Review Teams through Effective Communication: A Case Report." Journal of the Medical Library Association 109 (October 2021): 643-647; Okoli, Chitu, and Kira Schabram. "A Guide to Conducting a Systematic Literature Review of Information Systems Research."  Sprouts: Working Papers on Information Systems 10 (2010); Siddaway, Andy P., Alex M. Wood, and Larry V. Hedges. "How to Do a Systematic Review: A Best Practice Guide for Conducting and Reporting Narrative Reviews, Meta-analyses, and Meta-syntheses." Annual Review of Psychology 70 (2019): 747-770; Torgerson, Carole J. “Publication Bias: The Achilles’ Heel of Systematic Reviews?” British Journal of Educational Studies 54 (March 2006): 89-102; Torgerson, Carole. Systematic Reviews . New York: Continuum, 2003.

• << Previous: Purpose of Guide
• Next: Design Flaws to Avoid >>
• Last Updated: Aug 21, 2024 8:54 AM
• URL: https://libguides.usc.edu/writingguide

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS

Getting to the main article

Choosing your route

Setting research questions/ hypotheses

Assessment point

Building the theoretical case

Setting your research strategy

Data collection

Data analysis

Research design

The quantitative research design that you set in your dissertation should reflect the type of research questions/hypotheses that you have set. When we talk about quantitative research designs, we are typically referring to research following either a descriptive , experimental , quasi-experimental and relationship-based research design, which we will return to shortly. However, there are also specific goals that you may want to achieve within these research designs. You may want to: (Goal A) explore whether there is a relationship between different variables; (Goal B) predict a score or a membership of a group; or (Goal C) find out the differences between groups you are interested in or treatment conditions that you want to investigate:

GOAL A Exploring the relationship between variables

Are you trying to determine if there is a relationship between two or more variables, and what this relationship is? This kind of design is used to answer questions such as: Is there a relationship between height and basketball performance? Are males more likely to be smokers than females? Does you level of anxiety reduce your exam ability?

GOAL B Predicting a score or a membership of a group

Are you trying to examine whether one variable's value (i.e., the dependent or outcome variable) can be predicted based on another's (i.e., the independent variable). These designs answer questions such as: Can I predict 10km run time based on an individual's aerobic capacity? Can I predict exam anxiety based on knowing the number of hours spent revising? Can I predict whether someone is classified as computer literate based on their performance in different computer tasks? Can I predict an individual's preferred transport (car/motorcycle) based on their response to a risk questionnaire?

GOAL C Testing for differences between groups or treatment conditions

Are you trying to test for differences between groups (e.g., exam performance of males and females) or treatment conditions (e.g., employee turnover among employees (a) given a bonus and (b) not given a bonus)? This type of design aims to answer questions such as: What is the difference in jump height between males and females? Can an exercise-training programme lead to a reduction in blood sugar levels? Do stressed males and females respond differently to different stress-reduction therapies? In each of these cases, we have different groups that we are comparing (e.g., males versus females), and we may also have different treatments (e.g., the example of multiple stress-reduction therapies).

Goals A and B reflect the use of relationship-based research questions/hypotheses, whilst goal C reflects the use of comparative research questions/hypotheses. Just remember that in addition to relating and comparing (i.e., relationship-based and comparative research questions/hypotheses), quantitative research can also be used to describe the phenomena we are interested in (i.e., descriptive research questions). These three basic approaches (i.e., describing , relating and comparing ) can be seen in the following example:

Let's imagine we are interested in examining Facebook usage amongst university students in the United States .

We could describe factors relating to the make-up of these Facebook users, quantifying how many (or what proportion) of these university students were male or female, or what their average age was. We could describe factors relating to their behaviour, such as how frequently they used Facebook each week or the reasons why they joined Facebook in the first place (e.g., to connect with friends, to store all their photos in one place, etc.).

We could compare some of these factors (i.e., those factors that we had just described). For example, we could compare how frequently the students used Facebook each week, looking for differences between male and female students.

We could relate one or more of these factors (e.g., age) to other factors we had examined (e.g., how frequently students used Facebook each week) to find out if there were any associations or relationships between them. For example, we could relate age to how frequently the students used Facebook each week. This could help us discover if there was an association or relationship between these variables (i.e., age and weekly Facebook usage), and if so, tell us something about this association or relationship (e.g., its strength, direction, and/or statistical significance).

These three approaches to examining the constructs you are interested in (i.e., describing , comparing and relating ) are addressed by setting descriptive research questions, and/or comparative or relationship-based research questions/hypotheses. By this stage, you should be very clear about the type of research questions/hypotheses you are addressing, but if you are unsure, refer back to the Research Questions & Hypotheses section of the Fundamentals part of Lærd Dissertation now.

If you are exploring the relationship between variables (i.e., Goal A ), you are likely to be following a relationship-based research design (i.e., a type of non-experimental research design). However, if you are predicting the score or a membership of a group (i.e., Goal B ) or testing for differences between groups or treatment conditions (i.e., Goal C ), you are likely to be following either an experimental or quasi-experimental research design. Unless you already understand the differences between experimental, quasi-experimental and relationship-based research designs, you should read about these different research designs in the Research Designs section of the Fundamentals part of Lærd Dissertation now. You need to do this for two main reasons:

You will have to state which type of research design you are using in your dissertation when writing up the Research Design section of your Chapter Three: Research Strategy .

The research design that you use has a significant influence on your choice of research methods , the research quality of your findings, and even aspects of research ethics that you will have to think about.

Once you are familiar with the four types of research design (i.e., descriptive, experimental, quasi-experimental and relationship-based), you need to think about the route that you are adopting, and the approach within that route in order to set the research design in your dissertation:

• ROUTE A: Duplication
• ROUTE B: Generalisation
• ROUTE C: Extension

Route A: Duplication

If you are taking on Route A: Duplication , you would typically not be expected to make any changes to the research design used in the main journal article when setting the research design for your dissertation. After all, the purpose of the dissertation is duplication , where you are, in effect, re-testing the study in the main journal article to see if the same (or similar) findings are found. An important aspect of such re-testing is typically the use of the same research strategy applied in the main journal article. As such, if an experimental research design was used in the main journal article, with 3 groups (e.g., two treatment groups and one control group), your dissertation would also use an experimental design with the same group characteristics (i.e., 3 groups, with two treatment groups and one control group). The research design you used would also have the same goals as those in the main journal article (e.g., the goal of relating two constructs, perhaps study time and exam performance, in order to answer a relationship-based research question/hypothesis).

However, there are some instances where, from a practical standpoint, you may find that it is not possible to use the same research design, perhaps because an experimental research design was used, but you are unable to randomly selected people from the population you can get access to, forcing you to use a quasi-experimenta l research design. But the goal will be to use the same research design in your dissertation as the one applied in the main journal article. Again, you can learn about the differences between experimental and quasi-experimental designs in the Research Designs section of the Fundamentals part of Lærd Dissertation.

• University Libraries
• Research Guides
• Topic Guides
• Research Methods Guide
• Research Design & Method

Research Methods Guide: Research Design & Method

• Introduction
• Survey Research
• Interview Research
• Data Analysis
• Resources & Consultation

Tutorial Videos: Research Design & Method

Research Methods (sociology-focused)

Qualitative vs. Quantitative Methods (intro)

Qualitative vs. Quantitative Methods (advanced)

FAQ: Research Design & Method

What is the difference between Research Design and Research Method?

Research design is a plan to answer your research question.  A research method is a strategy used to implement that plan.  Research design and methods are different but closely related, because good research design ensures that the data you obtain will help you answer your research question more effectively.

Which research method should I choose ?

It depends on your research goal.  It depends on what subjects (and who) you want to study.  Let's say you are interested in studying what makes people happy, or why some students are more conscious about recycling on campus.  To answer these questions, you need to make a decision about how to collect your data.  Most frequently used methods include:

• Observation / Participant Observation
• Focus Groups
• Experiments
• Secondary Data Analysis / Archival Study
• Mixed Methods (combination of some of the above)

One particular method could be better suited to your research goal than others, because the data you collect from different methods will be different in quality and quantity.   For instance, surveys are usually designed to produce relatively short answers, rather than the extensive responses expected in qualitative interviews.

What other factors should I consider when choosing one method over another?

Time for data collection and analysis is something you want to consider.  An observation or interview method, so-called qualitative approach, helps you collect richer information, but it takes time.  Using a survey helps you collect more data quickly, yet it may lack details.  So, you will need to consider the time you have for research and the balance between strengths and weaknesses associated with each method (e.g., qualitative vs. quantitative).

• << Previous: Introduction
• Next: Survey Research >>
• Last Updated: Aug 21, 2023 10:42 AM

• Section 2: Home
• Developing the Quantitative Research Design
• Qualitative Descriptive Design
• Design and Development Research (DDR) For Instructional Design
• Qualitative Narrative Inquiry Research
• Action Research Resource
• Case Study Design in an Applied Doctorate

Qualitative Research Designs

Case study design, using case study design in the applied doctoral experience (ade), applicability of case study design to applied problem of practice, case study design references.

• SAGE Research Methods
• Research Examples (SAGE) This link opens in a new window
• Dataset Examples (SAGE) This link opens in a new window
• IRB Resource Center This link opens in a new window

The field of qualitative research there are a number of research designs (also referred to as “traditions” or “genres”), including case study, phenomenology, narrative inquiry, action research, ethnography, grounded theory, as well as a number of critical genres including Feminist theory, indigenous research, critical race theory and cultural studies. The choice of research design is directly tied to and must be aligned with your research problem and purpose. As Bloomberg & Volpe (2019) explain:

Choice of research design is directly tied to research problem and purpose. As the researcher, you actively create the link among problem, purpose, and design through a process of reflecting on problem and purpose, focusing on researchable questions, and considering how to best address these questions. Thinking along these lines affords a research study methodological congruence (p. 38).

Case study is an in-depth exploration from multiple perspectives of a bounded social phenomenon, be this a social system such as a program, event, institution, organization, or community (Stake, 1995, 2005; Yin, 2018). Case study is employed across disciplines, including education, health care, social work, sociology, and organizational studies. The purpose is to generate understanding and deep insights to inform professional practice, policy development, and community or social action (Bloomberg 2018).

Yin (2018) and Stake (1995, 2005), two of the key proponents of case study methodology, use different terms to describe case studies. Yin categorizes case studies as exploratory or descriptive . The former is used to explore those situations in which the intervention being evaluated has no clear single set of outcomes. The latter is used to describe an intervention or phenomenon and the real-life context in which it occurred. Stake identifies case studies as intrinsic or instrumental , and he proposes that a primary distinction in designing case studies is between single and multiple (or collective) case study designs. A single case study may be an instrumental case study (research focuses on an issue or concern in one bounded case) or an intrinsic case study (the focus is on the case itself because the case presents a unique situation). A longitudinal case study design is chosen when the researcher seeks to examine the same single case at two or more different points in time or to capture trends over time. A multiple case study design is used when a researcher seeks to determine the prevalence or frequency of a particular phenomenon. This approach is useful when cases are used for purposes of a cross-case analysis in order to compare, contrast, and synthesize perspectives regarding the same issue. The focus is on the analysis of diverse cases to determine how these confirm the findings within or between cases, or call the findings into question.

Case study affords significant interaction with research participants, providing an in-depth picture of the phenomenon (Bloomberg & Volpe, 2019). Research is extensive, drawing on multiple methods of data collection, and involves multiple data sources. Triangulation is critical in attempting to obtain an in-depth understanding of the phenomenon under study and adds rigor, breadth, and depth to the study and provides corroborative evidence of the data obtained. Analysis of data can be holistic or embedded—that is, dealing with the whole or parts of the case (Yin, 2018). With multiple cases the typical analytic strategy is to provide detailed description of themes within each case (within-case analysis), followed by thematic analysis across cases (cross-case analysis), providing insights regarding how individual cases are comparable along important dimensions. Research culminates in the production of a detailed description of a setting and its participants, accompanied by an analysis of the data for themes or patterns (Stake, 1995, 2005; Yin, 2018). In addition to thick, rich description, the researcher’s interpretations, conclusions, and recommendations contribute to the reader’s overall understanding of the case study.

Analysis of findings should show that the researcher has attended to all the data, should address the most significant aspects of the case, and should demonstrate familiarity with the prevailing thinking and discourse about the topic. The goal of case study design (as with all qualitative designs) is not generalizability but rather transferability —that is, how (if at all) and in what ways understanding and knowledge can be applied in similar contexts and settings. The qualitative researcher attempts to address the issue of transferability by way of thick, rich description that will provide the basis for a case or cases to have relevance and potential application across a broader context.

Qualitative research methods ask the questions of "what" and "how" a phenomenon is understood in a real-life context (Bloomberg & Volpe, 2019). In the education field, qualitative research methods uncover educational experiences and practices because qualitative research allows the researcher to reveal new knowledge and understanding. Moreover, qualitative descriptive case studies describe, analyze and interpret events that explain the reasoning behind specific phenomena (Bloomberg, 2018). As such, case study design can be the foundation for a rigorous study within the Applied Doctoral Experience (ADE).

Case study design is an appropriate research design to consider when conceptualizing and conducting a dissertation research study that is based on an applied problem of practice with inherent real-life educational implications. Case study researchers study current, real-life cases that are in progress so that they can gather accurate information that is current. This fits well with the ADE program, as students are typically exploring a problem of practice. Because of the flexibility of the methods used, a descriptive design provides the researcher with the opportunity to choose data collection methods that are best suited to a practice-based research purpose, and can include individual interviews, focus groups, observation, surveys, and critical incident questionnaires. Methods are triangulated to contribute to the study’s trustworthiness. In selecting the set of data collection methods, it is important that the researcher carefully consider the alignment between research questions and the type of data that is needed to address these. Each data source is one piece of the “puzzle,” that contributes to the researcher’s holistic understanding of a phenomenon. The various strands of data are woven together holistically to promote a deeper understanding of the case and its application to an educationally-based problem of practice.

Research studies within the Applied Doctoral Experience (ADE) will be practical in nature and focus on problems and issues that inform educational practice.  Many of the types of studies that fall within the ADE framework are exploratory, and align with case study design. Case study design fits very well with applied problems related to educational practice, as the following set of examples illustrate:

Elementary Bilingual Education Teachers’ Self-Efficacy in Teaching English Language Learners: A Qualitative Case Study

The problem to be addressed in the proposed study is that some elementary bilingual education teachers’ beliefs about their lack of preparedness to teach the English language may negatively impact the language proficiency skills of Hispanic ELLs (Ernst-Slavit & Wenger, 2016; Fuchs et al., 2018; Hoque, 2016). The purpose of the proposed qualitative descriptive case study was to explore the perspectives and experiences of elementary bilingual education teachers regarding their perceived lack of preparedness to teach the English language and how this may impact the language proficiency of Hispanic ELLs.

Exploring Minority Teachers Experiences Pertaining to their Value in Education: A Single Case Study of Teachers in New York City

The problem is that minority K-12 teachers are underrepresented in the United States, with research indicating that school leaders and teachers in schools that are populated mainly by black students, staffed mostly by white teachers who may be unprepared to deal with biases and stereotypes that are ingrained in schools (Egalite, Kisida, & Winters, 2015; Milligan & Howley, 2015). The purpose of this qualitative exploratory single case study was to develop a clearer understanding of minority teachers’ experiences concerning the under-representation of minority K-12 teachers in urban school districts in the United States since there are so few of them.

Exploring the Impact of an Urban Teacher Residency Program on Teachers’ Cultural Intelligence: A Qualitative Case Study

The problem to be addressed by this case study is that teacher candidates often report being unprepared and ill-equipped to effectively educate culturally diverse students (Skepple, 2015; Beutel, 2018). The purpose of this study was to explore and gain an in-depth understanding of the perceived impact of an urban teacher residency program in urban Iowa on teachers’ cultural competence using the cultural intelligence (CQ) framework (Earley & Ang, 2003).

Qualitative Case Study that Explores Self-Efficacy and Mentorship on Women in Academic Administrative Leadership Roles

The problem was that female school-level administrators might be less likely to experience mentorship, thereby potentially decreasing their self-efficacy (Bing & Smith, 2019; Brown, 2020; Grant, 2021). The purpose of this case study was to determine to what extent female school-level administrators in the United States who had a mentor have a sense of self-efficacy and to examine the relationship between mentorship and self-efficacy.

Suburban Teacher and Administrator Perceptions of Culturally Responsive Teaching to Promote Connectedness in Students of Color: A Qualitative Case Study

The problem to be addressed in this study is the racial discrimination experienced by students of color in suburban schools and the resulting negative school experience (Jara & Bloomsbury, 2020; Jones, 2019; Kohli et al., 2017; Wandix-White, 2020). The purpose of this case study is to explore how culturally responsive practices can counteract systemic racism and discrimination in suburban schools thereby meeting the needs of students of color by creating positive learning experiences. 

As you can see, all of these studies were well suited to qualitative case study design. In each of these studies, the applied research problem and research purpose were clearly grounded in educational practice as well as directly aligned with qualitative case study methodology. In the Applied Doctoral Experience (ADE), you will be focused on addressing or resolving an educationally relevant research problem of practice. As such, your case study, with clear boundaries, will be one that centers on a real-life authentic problem in your field of practice that you believe is in need of resolution or improvement, and that the outcome thereof will be educationally valuable.

Bloomberg, L. D. (2018). Case study method. In B. B. Frey (Ed.), The SAGE Encyclopedia of educational research, measurement, and evaluation (pp. 237–239). SAGE. https://go.openathens.net/redirector/nu.edu?url=https%3A%2F%2Fmethods.sagepub.com%2FReference%2Fthe-sage-encyclopedia-of-educational-research-measurement-and-evaluation%2Fi4294.xml

Bloomberg, L. D. & Volpe, M. (2019). Completing your qualitative dissertation: A road map from beginning to end . (4th Ed.). SAGE.

Stake, R. E. (1995). The art of case study research. SAGE.

Stake, R. E. (2005). Qualitative case studies. In N. K. Denzin and Y. S. Lincoln (Eds.), The SAGE handbook of qualitative research (3rd ed., pp. 443–466). SAGE.

Yin, R. (2018). Case study research and applications: Designs and methods. SAGE.

• << Previous: Action Research Resource
• Next: SAGE Research Methods >>
• Last Updated: Jul 28, 2023 8:05 AM
• URL: https://resources.nu.edu/c.php?g=1013605

© Copyright 2024 National University. All Rights Reserved.

Privacy Policy | Consumer Information

• Privacy Policy

Home » Research Design – Types, Methods and Examples

Research Design – Types, Methods and Examples

Table of Contents

Research Design

Definition:

Research design refers to the overall strategy or plan for conducting a research study. It outlines the methods and procedures that will be used to collect and analyze data, as well as the goals and objectives of the study. Research design is important because it guides the entire research process and ensures that the study is conducted in a systematic and rigorous manner.

Types of Research Design

Types of Research Design are as follows:

Descriptive Research Design

This type of research design is used to describe a phenomenon or situation. It involves collecting data through surveys, questionnaires, interviews, and observations. The aim of descriptive research is to provide an accurate and detailed portrayal of a particular group, event, or situation. It can be useful in identifying patterns, trends, and relationships in the data.

Correlational Research Design

Correlational research design is used to determine if there is a relationship between two or more variables. This type of research design involves collecting data from participants and analyzing the relationship between the variables using statistical methods. The aim of correlational research is to identify the strength and direction of the relationship between the variables.

Experimental Research Design

Experimental research design is used to investigate cause-and-effect relationships between variables. This type of research design involves manipulating one variable and measuring the effect on another variable. It usually involves randomly assigning participants to groups and manipulating an independent variable to determine its effect on a dependent variable. The aim of experimental research is to establish causality.

Quasi-experimental Research Design

Quasi-experimental research design is similar to experimental research design, but it lacks one or more of the features of a true experiment. For example, there may not be random assignment to groups or a control group. This type of research design is used when it is not feasible or ethical to conduct a true experiment.

Case Study Research Design

Case study research design is used to investigate a single case or a small number of cases in depth. It involves collecting data through various methods, such as interviews, observations, and document analysis. The aim of case study research is to provide an in-depth understanding of a particular case or situation.

Longitudinal Research Design

Longitudinal research design is used to study changes in a particular phenomenon over time. It involves collecting data at multiple time points and analyzing the changes that occur. The aim of longitudinal research is to provide insights into the development, growth, or decline of a particular phenomenon over time.

Structure of Research Design

The format of a research design typically includes the following sections:

• Introduction : This section provides an overview of the research problem, the research questions, and the importance of the study. It also includes a brief literature review that summarizes previous research on the topic and identifies gaps in the existing knowledge.
• Research Questions or Hypotheses: This section identifies the specific research questions or hypotheses that the study will address. These questions should be clear, specific, and testable.
• Research Methods : This section describes the methods that will be used to collect and analyze data. It includes details about the study design, the sampling strategy, the data collection instruments, and the data analysis techniques.
• Data Collection: This section describes how the data will be collected, including the sample size, data collection procedures, and any ethical considerations.
• Data Analysis: This section describes how the data will be analyzed, including the statistical techniques that will be used to test the research questions or hypotheses.
• Results : This section presents the findings of the study, including descriptive statistics and statistical tests.
• Discussion and Conclusion : This section summarizes the key findings of the study, interprets the results, and discusses the implications of the findings. It also includes recommendations for future research.
• References : This section lists the sources cited in the research design.

Example of Research Design

An Example of Research Design could be:

Research question: Does the use of social media affect the academic performance of high school students?

Research design:

• Research approach : The research approach will be quantitative as it involves collecting numerical data to test the hypothesis.
• Research design : The research design will be a quasi-experimental design, with a pretest-posttest control group design.
• Sample : The sample will be 200 high school students from two schools, with 100 students in the experimental group and 100 students in the control group.
• Data collection : The data will be collected through surveys administered to the students at the beginning and end of the academic year. The surveys will include questions about their social media usage and academic performance.
• Data analysis : The data collected will be analyzed using statistical software. The mean scores of the experimental and control groups will be compared to determine whether there is a significant difference in academic performance between the two groups.
• Limitations : The limitations of the study will be acknowledged, including the fact that social media usage can vary greatly among individuals, and the study only focuses on two schools, which may not be representative of the entire population.
• Ethical considerations: Ethical considerations will be taken into account, such as obtaining informed consent from the participants and ensuring their anonymity and confidentiality.

How to Write Research Design

Writing a research design involves planning and outlining the methodology and approach that will be used to answer a research question or hypothesis. Here are some steps to help you write a research design:

• Define the research question or hypothesis : Before beginning your research design, you should clearly define your research question or hypothesis. This will guide your research design and help you select appropriate methods.
• Select a research design: There are many different research designs to choose from, including experimental, survey, case study, and qualitative designs. Choose a design that best fits your research question and objectives.
• Develop a sampling plan : If your research involves collecting data from a sample, you will need to develop a sampling plan. This should outline how you will select participants and how many participants you will include.
• Define variables: Clearly define the variables you will be measuring or manipulating in your study. This will help ensure that your results are meaningful and relevant to your research question.
• Choose data collection methods : Decide on the data collection methods you will use to gather information. This may include surveys, interviews, observations, experiments, or secondary data sources.
• Create a data analysis plan: Develop a plan for analyzing your data, including the statistical or qualitative techniques you will use.
• Consider ethical concerns : Finally, be sure to consider any ethical concerns related to your research, such as participant confidentiality or potential harm.

When to Write Research Design

Research design should be written before conducting any research study. It is an important planning phase that outlines the research methodology, data collection methods, and data analysis techniques that will be used to investigate a research question or problem. The research design helps to ensure that the research is conducted in a systematic and logical manner, and that the data collected is relevant and reliable.

Ideally, the research design should be developed as early as possible in the research process, before any data is collected. This allows the researcher to carefully consider the research question, identify the most appropriate research methodology, and plan the data collection and analysis procedures in advance. By doing so, the research can be conducted in a more efficient and effective manner, and the results are more likely to be valid and reliable.

Purpose of Research Design

The purpose of research design is to plan and structure a research study in a way that enables the researcher to achieve the desired research goals with accuracy, validity, and reliability. Research design is the blueprint or the framework for conducting a study that outlines the methods, procedures, techniques, and tools for data collection and analysis.

Some of the key purposes of research design include:

• Providing a clear and concise plan of action for the research study.
• Ensuring that the research is conducted ethically and with rigor.
• Maximizing the accuracy and reliability of the research findings.
• Minimizing the possibility of errors, biases, or confounding variables.
• Ensuring that the research is feasible, practical, and cost-effective.
• Determining the appropriate research methodology to answer the research question(s).
• Identifying the sample size, sampling method, and data collection techniques.
• Determining the data analysis method and statistical tests to be used.
• Facilitating the replication of the study by other researchers.
• Enhancing the validity and generalizability of the research findings.

Applications of Research Design

There are numerous applications of research design in various fields, some of which are:

• Social sciences: In fields such as psychology, sociology, and anthropology, research design is used to investigate human behavior and social phenomena. Researchers use various research designs, such as experimental, quasi-experimental, and correlational designs, to study different aspects of social behavior.
• Education : Research design is essential in the field of education to investigate the effectiveness of different teaching methods and learning strategies. Researchers use various designs such as experimental, quasi-experimental, and case study designs to understand how students learn and how to improve teaching practices.
• Health sciences : In the health sciences, research design is used to investigate the causes, prevention, and treatment of diseases. Researchers use various designs, such as randomized controlled trials, cohort studies, and case-control studies, to study different aspects of health and healthcare.
• Business : Research design is used in the field of business to investigate consumer behavior, marketing strategies, and the impact of different business practices. Researchers use various designs, such as survey research, experimental research, and case studies, to study different aspects of the business world.
• Engineering : In the field of engineering, research design is used to investigate the development and implementation of new technologies. Researchers use various designs, such as experimental research and case studies, to study the effectiveness of new technologies and to identify areas for improvement.

Advantages of Research Design

Here are some advantages of research design:

• Systematic and organized approach : A well-designed research plan ensures that the research is conducted in a systematic and organized manner, which makes it easier to manage and analyze the data.
• Clear objectives: The research design helps to clarify the objectives of the study, which makes it easier to identify the variables that need to be measured, and the methods that need to be used to collect and analyze data.
• Minimizes bias: A well-designed research plan minimizes the chances of bias, by ensuring that the data is collected and analyzed objectively, and that the results are not influenced by the researcher’s personal biases or preferences.
• Efficient use of resources: A well-designed research plan helps to ensure that the resources (time, money, and personnel) are used efficiently and effectively, by focusing on the most important variables and methods.
• Replicability: A well-designed research plan makes it easier for other researchers to replicate the study, which enhances the credibility and reliability of the findings.
• Validity: A well-designed research plan helps to ensure that the findings are valid, by ensuring that the methods used to collect and analyze data are appropriate for the research question.
• Generalizability : A well-designed research plan helps to ensure that the findings can be generalized to other populations, settings, or situations, which increases the external validity of the study.

Research Design Vs Research Methodology

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Gap – Types, Examples and How to...

Critical Analysis – Types, Examples and Writing...

Data Interpretation – Process, Methods and...

Data Collection – Methods Types and Examples

Chapter Summary & Overview – Writing Guide...

Research Summary – Structure, Examples and...

Leave a comment x.

Save my name, email, and website in this browser for the next time I comment.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• Descriptive Research Design | Definition, Methods & Examples

Descriptive Research Design | Definition, Methods & Examples

Published on 5 May 2022 by Shona McCombes . Revised on 10 October 2022.

Descriptive research aims to accurately and systematically describe a population, situation or phenomenon. It can answer what , where , when , and how   questions , but not why questions.

A descriptive research design can use a wide variety of research methods  to investigate one or more variables . Unlike in experimental research , the researcher does not control or manipulate any of the variables, but only observes and measures them.

Table of contents

When to use a descriptive research design, descriptive research methods.

Descriptive research is an appropriate choice when the research aim is to identify characteristics, frequencies, trends, and categories.

It is useful when not much is known yet about the topic or problem. Before you can research why something happens, you need to understand how, when, and where it happens.

• How has the London housing market changed over the past 20 years?
• Do customers of company X prefer product Y or product Z?
• What are the main genetic, behavioural, and morphological differences between European wildcats and domestic cats?
• What are the most popular online news sources among under-18s?
• How prevalent is disease A in population B?

Prevent plagiarism, run a free check.

Descriptive research is usually defined as a type of quantitative research , though qualitative research can also be used for descriptive purposes. The research design should be carefully developed to ensure that the results are valid and reliable .

Survey research allows you to gather large volumes of data that can be analysed for frequencies, averages, and patterns. Common uses of surveys include:

• Describing the demographics of a country or region
• Gauging public opinion on political and social topics
• Evaluating satisfaction with a company’s products or an organisation’s services

Observations

Observations allow you to gather data on behaviours and phenomena without having to rely on the honesty and accuracy of respondents. This method is often used by psychological, social, and market researchers to understand how people act in real-life situations.

Observation of physical entities and phenomena is also an important part of research in the natural sciences. Before you can develop testable hypotheses , models, or theories, it’s necessary to observe and systematically describe the subject under investigation.

Case studies

A case study can be used to describe the characteristics of a specific subject (such as a person, group, event, or organisation). Instead of gathering a large volume of data to identify patterns across time or location, case studies gather detailed data to identify the characteristics of a narrowly defined subject.

Rather than aiming to describe generalisable facts, case studies often focus on unusual or interesting cases that challenge assumptions, add complexity, or reveal something new about a research problem .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). Descriptive Research Design | Definition, Methods & Examples. Scribbr. Retrieved 21 August 2024, from https://www.scribbr.co.uk/research-methods/descriptive-research-design/

Is this article helpful?

Shona McCombes

Other students also liked, a quick guide to experimental design | 5 steps & examples, correlational research | guide, design & examples, qualitative vs quantitative research | examples & methods.

• Study and research support
• Academic skills

Dissertation examples

Listed below are some of the best examples of research projects and dissertations from undergraduate and taught postgraduate students at the University of Leeds We have not been able to gather examples from all schools. The module requirements for research projects may have changed since these examples were written. Refer to your module guidelines to make sure that you address all of the current assessment criteria. Some of the examples below are only available to access on campus.

• Undergraduate examples
• Taught Masters examples

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Starting the research process
• 10 Research Question Examples to Guide Your Research Project

10 Research Question Examples to Guide your Research Project

Published on October 30, 2022 by Shona McCombes . Revised on October 19, 2023.

The research question is one of the most important parts of your research paper , thesis or dissertation . It’s important to spend some time assessing and refining your question before you get started.

The exact form of your question will depend on a few things, such as the length of your project, the type of research you’re conducting, the topic , and the research problem . However, all research questions should be focused, specific, and relevant to a timely social or scholarly issue.

Once you’ve read our guide on how to write a research question , you can use these examples to craft your own.

Note that the design of your research question can depend on what method you are pursuing. Here are a few options for qualitative, quantitative, and statistical research questions.

Other interesting articles

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

Methodology

• Sampling methods
• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, October 19). 10 Research Question Examples to Guide your Research Project. Scribbr. Retrieved August 24, 2024, from https://www.scribbr.com/research-process/research-question-examples/

Is this article helpful?

Shona McCombes

Other students also liked, writing strong research questions | criteria & examples, how to choose a dissertation topic | 8 steps to follow, evaluating sources | methods & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Free Download

Dissertation/Thesis Template

The fastest (and smartest) way to craft a winning dissertation that showcases your study and earns you marks. 

Available in Google Doc, Word & PDF format 4.9 star rating, 5000 + downloads

Step-by-step instructions

Tried & tested academic format

Fill-in-the-blanks simplicity

Pro tips, tricks and resources

What’s Covered In The Template?

This dissertation template is based on the tried and trusted best-practice format for formal academic research projects. The template structure reflects the overall research process, ensuring your document has a smooth, logical flow. Here’s how it’s structured:

• The title page/cover page
• Abstract (sometimes also called the executive summary)
• Table of contents
• List of figures /list of tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Research findings /results 
• Chapter 5: Discussion /analysis of findings
• Chapter 6: Conclusion
• Reference list

Each section is explained in plain, straightforward language , followed by an overview of the key elements that you need to cover within each section. We’ve also included practical examples to help you understand exactly what’s required in each section.

Download The Template

100% Free. Instant Access.

I agree to receive the free template and other useful resources.

Download Now (Instant Access)

FAQs: Dissertation & Thesis Template

Faqs: dissertation template, what format is the template (doc, pdf, ppt, etc.).

The dissertation template is provided as a Google Doc. You can download it in MS Word format or make a copy to your Google Drive. You’re also welcome to convert it to whatever format works best for you, such as LaTeX or PDF.

What types of dissertations/theses can this template be used for?

The template follows the standard best-practice structure for formal academic research projects such as dissertations or theses, so it is suitable for the vast majority of degrees, particularly those within the sciences.

Some universities may have some additional requirements, but these are typically minor, with the core structure remaining the same. Therefore, it’s always a good idea to double-check your university’s requirements before you finalise your structure.

Will this work for a research paper?

A research paper follows a similar format, but there are a few differences. You can find our research paper template here .

Is this template for an undergrad, Masters or PhD-level thesis?

This template can be used for a dissertation, thesis or research project at any level of study. It may be slight overkill for an undergraduate-level study, but it certainly won’t be missing anything.

How long should my dissertation/thesis be?

This depends entirely on your university’s specific requirements, so it’s best to check with them. As a general ballpark, Masters-level projects are usually 15,000 – 20,000 words in length, while Doctoral-level projects are often in excess of 60,000 words.

What about the research proposal?

If you’re still working on your research proposal, we’ve got a template for that here .

We’ve also got loads of proposal-related guides and videos over on the Grad Coach blog .

How do I write a literature review?

We have a wealth of free resources on the Grad Coach Blog that unpack how to write a literature review from scratch. You can check out the literature review section of the blog here.

How do I create a research methodology?

We have a wealth of free resources on the Grad Coach Blog that unpack research methodology, both qualitative and quantitative. You can check out the methodology section of the blog here.

Can I share this dissertation template with my friends/colleagues?

Yes, you’re welcome to share this template. If you want to post about it on your blog or social media, all we ask is that you reference this page as your source.

Can Grad Coach help me with my dissertation/thesis?

Within the template, you’ll find plain-language explanations of each section, which should give you a fair amount of guidance. However, you’re also welcome to consider our dissertation and thesis coaching services .

Additional Resources

If you’re working on a dissertation or thesis, be sure to also check these resources out…

1-On-1 Private Coaching

The Grad Coach Resource Center

The Grad Coach YouTube Channel

The Grad Coach Podcast